|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-10-2017, 08:27 PM | #11 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: oil to top end g14
I'm not sure. I never heard of any common failures from lack of oil in top end. I have heard of many G2/9 blowing oil into the airbox, and that hose is off the rocker cover so they have too much oil there (or blow by pushing it). So it might be a problem to have too much oil up there.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-11-2017, 06:48 AM | #12 |
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: oil to top end g14
I'm thinking of doing it so the engine is also oil cooled, long term project.
|
10-11-2017, 07:38 AM | #13 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: oil to top end g14
I'm a firm believer in don't fix something that's not broke so I'd freshen up the cylinder pistons and rings and call it good
|
10-11-2017, 11:25 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: oil to top end g14
I think that would be robbing the bottom end of necessary oil to solve a non existent top end problem. Yamaha engine engineers aren't a bunch of dummies, I would trust them. And about that oil cooling thing, trust me, plenty of oil is already being thrown around to cool things. If you have ever started one with the oil cap off, you would know that first-hand.
|
10-12-2017, 07:26 AM | #15 |
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: oil to top end g14
You get me somewhat wrong, I would need oil cooling due to use outside the cooling system design. I'll maybe show you later, way later.
|
10-12-2017, 10:27 AM | #16 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: oil to top end g14
What exactly are you planning on using the cart for? These carts are underpowered so if you were to use it in a way you need to cool the oil I feel like you would have other problems before oil temp becomes an issue
|
10-12-2017, 03:09 PM | #17 |
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: oil to top end g14
Forced induction
|
10-12-2017, 05:15 PM | #18 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: oil to top end g14
I wish you the best of luck but I don't see how youre going to accomplish this with these little carbs
|
10-12-2017, 07:29 PM | #19 |
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: oil to top end g14
I'll have a thread along soon as I have started down the road towards it. No carb
|
10-12-2017, 07:56 PM | #20 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: oil to top end g14
Awesome will definitely be following it
|