|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-19-2018, 03:16 PM | #1 |
Not Yet Wild
Join Date: Jun 2018
Location: Virginia
Posts: 5
|
Yamaha G1 solenoid wiring
So I just bought two new solenoids from buggies unlimited for my g1 and I'm guessing they do not wire up the same as the originals? The cart tries to run now as soon as I hook the battery up regardless of the key position. It acts like a stuck solenoid, but I was wondering if I had something wired up wrong. Any help is greatly appreciated!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2018, 04:43 PM | #2 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 solenoid wiring
Are you going from "square" solenoids to "round"?
|
06-19-2018, 04:46 PM | #3 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 solenoid wiring
If so read this thread http://www.buggiesgonewild.com/gas-y...-solenoid.html
|
06-19-2018, 06:55 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Yamaha G1 solenoid wiring
If you read the solenoids, normally open and normally closed, the aftermarket ones are backwards of the OEM Yamaha ones. They need to be mounted and wired correctly to make them work right.
|
06-19-2018, 10:43 PM | #5 |
Not Yet Wild
Join Date: Jun 2018
Location: Virginia
Posts: 5
|
Re: Yamaha G1 solenoid wiring
I'm going from round originals to the round new ones. What will need to be wired differently? I think I see what your talking about on the solenoid. The 0 stamped on the case is facing the front of the cart right now. I will need to flip it so it's facing the back right? Guess I'm just confused now on what to wire up.
|
06-20-2018, 07:06 AM | #6 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 solenoid wiring
What year is your cart pre 82 the were different and unavailable (square with connections on on end) if you have a newer g1 and it has the round solenoids with connections on both ends they will wire up the exact same way
|
06-20-2018, 05:43 PM | #7 |
Not Yet Wild
Join Date: Jun 2018
Location: Virginia
Posts: 5
|
Re: Yamaha G1 solenoid wiring
The originals had the connections on both ends just like the new ones I bought, but they do not wire up the same. At least they don't act like they do.
|
06-20-2018, 10:48 PM | #8 |
Not Yet Wild
Join Date: Jun 2018
Location: Virginia
Posts: 5
|
Re: Yamaha G1 solenoid wiring
Does anybody have a picture of aftermarket solenoids wired up so I can see how you hooked them up? Or a wiring diagram would also be helpful. Any help is greatly appreciated!! Thanks guys.
|
06-21-2018, 10:08 AM | #9 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 solenoid wiring
Post a picture of what your new ones look like they should bolt right up if you got the correct ones for the g1
|
06-21-2018, 12:41 PM | #10 | |
Gone Wild
Join Date: Jun 2012
Location: Spicewood, TX
Posts: 219
|
Re: Yamaha G1 solenoid wiring
Quote:
This is a J10-03XXXX cart from 1981. HTH, Ogre |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 Yamaha 48v - Wiring Schematic / Solenoid | Electric Yamaha | |||
Can some one take a pic of there solenoid wiring ez go txt?? | Gas EZGO | |||
Yamaha G19E Electric Solenoid Wiring Issue | Electric Yamaha | |||
solenoid wiring | Electric EZGO | |||
Need help on wiring solenoid | Electric EZGO |