|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-07-2014, 08:34 AM | #1 |
Not Yet Wild
Join Date: Aug 2014
Location: NEPA
Posts: 3
|
1993 EzGo Belt Slipping
Hello, I just bought my first cart, a 1993 4 cycle EZGO. I am very green to these and was looking for some help. When i press the gas, motor kicks on, turns the smaller belt (from the starter i believe) which turns the bigger pulley, But it seems the belt is to loose, and does not spin the drive pulley. I looked for a tension-er but could not find one? Can anybody point me in the right direction? This rookie could use some advise!\
Also if someone has a copy of the owners manuel that would be great! I found the parts/service but not the owners. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-08-2014, 07:30 PM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: 1993 EzGo Belt Slipping
Loosen the bolts on the starter/generator to adjust the belt, it swivels back and forth to tighten or loosen..
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo st350 Motor turning but belt slipping | Electric EZGO | |||
Belt slipping | Gas EZGO | |||
1993 ezgo drive belt question | Gas EZGO | |||
belt slipping when wet. | Gas Yamaha |