Can I move the forward/reverse switch?

[FIXEROFCARTS]

Its a PDS car......its moving the rocker switch to the column, its all small wiring. If you do most os the work yourself, it could be done for cheap.

[gaston]

I have this on a Regen cart also (ex-PDS), rocker switch on the right side of column. Purty comfortable.

Here's a pic:



You can extend the 3 wires, try to use 3 different colors so you don't mess with this.

Guys here missread/thought you had a series cart where the f/r switch uses thick wiring... I think that one with enough skills can make it with less than 20, of course, a pretty well made job is a little more expensive.
I made the housing out of wood and a good paint job.

[SP-Electronics]

Originally Posted by MichelleOH

No, don't want to spend the money on a column cover right now. I was planning to put them in a black tube running the length of the column. I also was planning to use the existing forward/reverse switch until I find something else that doesn't break the bank.

Moving the switch is because I travel with a 70 pound dog on the seat beside me and it's pretty tough to reach over her to flip that switch. Besides that, the location of it just plain stinks. ;)

Thanks for replying. Keep the advice coming!

Why not just move it to the LEFT side of the seat cowl, so you don't have to reach over the dog? That would eliminate a LOT of excess wiring and rigging.

Edit: Ahh, yes, I was misreading it, and thinking of a series cart F/R switch. Sorry. Yours should be fairly simple if it's just a toggle switch with small wires. Should be pretty easy to figure out a way to mount the switch on the column and extend the wiring.