|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-19-2011, 10:19 AM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 1
|
How do I get inside a curtis 1206?
The title says it all, I would like to get into a non operating Curtis 1206 type of EZ-Go controller (25864G05) without damaging it further. Can anyone give me a clue?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2011, 05:44 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: How do I get inside a curtis 1206?
I opened up one a year or so ago. It "simply" snaps on, but isn't so simple to snap apart. If I recall, The "snaps" run down the whole length of the two sides. Just run a thin screwdriver between the heatsink and the case and you'll see where the snaps are located. From there it's just a matter of determination.
|
08-13-2013, 05:55 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Posts: 1
|
Re: How do I get inside a curtis 1206?
use a hair blower- it makes it a little easier to take off
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Curtis 1206 controller wiring diagram | Electric EZGO | |||
1206 4 bar controller | Electric EZGO | |||
replacing a curtis 1206 with a 1204 | Electric EZGO | |||
Curtis 1206 Controller | Electric EZGO | |||
Curtis 1206 test ? | Electric EZGO |