helo from a newper

TheNewGuy · 08-16-2007, 08:26 PM

Quote:

Originally Posted by tew45

I have a Yamaha G9 and a 76 HD 3 Wheel. I have already rebuilt the Harley's mechanics. It isn't good looking yet. I tried to rebuild the Yamaha and it did a good job for a while. Has a knock now (explained in another post). And the coil or ? went out last week and am trying to get a history of problems here (coil, igniter or ?). I think this forum will be a good one! Thanks PV5.

What does the G9 look like??? PICS??? Have you done anything to it??

tew45 · 08-16-2007, 11:41 PM

Thanks for the welcome folks! I hope to make my cart look much better but I have an engine that is sick (knocking and not the crank bearings) The coil is also bad now. So I am thinking engine swap Sooo!
I have some questions:
1 how do you adapt a Yamaha clutch ti a Briggs engine?
2 I can fabricate engine mounts but a little help would be welcome.
3 Normally do people let the Briggs engine idle or do they gas peddle start cart style?
I know you guys have a good idea or two for me.
I am retired so I am on a limited income and have to modify what I have (yamaha clutch).
I write gunsmithing and hunting articles and split the cash to pay for golf cart work and going to see my grand kids in Conway Arkansas. DIY help is a must.
Thanks again for the warm welcome! Tony

TheNewGuy · 08-17-2007, 06:21 AM

1. I'm not sure, if it can be done you would need to machine the ID of the
clutch to fit.

2. The engine mount is fairly simple, maybe you can get some ideas here:
http://www.buggiesgonewild.com/membe...ebadboyg9.html

http://www.buggiesgonewild.com/membe...oys-g-9-a.html

3. I have mine setup to idle like a car, I think most do it this way.

08-16-2007, 11:41 PM	#12
tew45 Gone Wild Join Date: Aug 2007 Location: North Texas Posts: 2,312	Re: helo from a newper Thanks for the welcome folks! I hope to make my cart look much better but I have an engine that is sick (knocking and not the crank bearings) The coil is also bad now. So I am thinking engine swap Sooo! I have some questions: 1 how do you adapt a Yamaha clutch ti a Briggs engine? 2 I can fabricate engine mounts but a little help would be welcome. 3 Normally do people let the Briggs engine idle or do they gas peddle start cart style? I know you guys have a good idea or two for me. I am retired so I am on a limited income and have to modify what I have (yamaha clutch). I write gunsmithing and hunting articles and split the cash to pay for golf cart work and going to see my grand kids in Conway Arkansas. DIY help is a must. Thanks again for the warm welcome! Tony

08-17-2007, 06:21 AM	#13
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,047	Re: helo from a newper 1. I'm not sure, if it can be done you would need to machine the ID of the clutch to fit. 2. The engine mount is fairly simple, maybe you can get some ideas here: http://www.buggiesgonewild.com/membe...ebadboyg9.html http://www.buggiesgonewild.com/membe...oys-g-9-a.html 3. I have mine setup to idle like a car, I think most do it this way.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum