|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
01-19-2020, 08:52 AM
|
#1 |
|
Gone Wild
Join Date: Dec 2019
Location: Inside house, bedroom too
Posts: 209
|
Powershooting 1204 controller
Is my controller definitely dead if it tested,?
B- to term 1 wire= 48.5 v B+ to m-=33.8 B- to b+ = 34.9 Thank you If not what do I check next? Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-19-2020, 09:01 AM
|
#2 |
|
Gone Wild
Join Date: Dec 2019
Location: Inside house, bedroom too
Posts: 209
|
Re: Powershooting 1204 controller
Will putting moderate pressure on an mcor4 (pulled and pushed on firmly) cause it to malfunction and silence solenoid? Thank you.
|
|
|
|
|
01-19-2020, 09:15 AM
|
#3 | |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Powershooting 1204 controller
Quote:
|
|
|
|
|
|
01-19-2020, 11:09 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2019
Location: Inside house, bedroom too
Posts: 209
|
Re: Powershooting 1204 controller
I stand very corrected. I did not notice readings were all getting lower due to a damaged positive comments wire. All three were at about 48. I tightened way down on mcor4 housing and the solenoid is clicking again. If the tire learn to spin I'll be done.
Many thanks |
|
|
|
|
01-19-2020, 11:10 AM
|
#5 |
|
Gone Wild
Join Date: Dec 2019
Location: Inside house, bedroom too
Posts: 209
|
Re: Powershooting 1204 controller
Vom wire
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Can I use a 1204-412 Controller on a 410 | Electric Club Car | |||
| WTB- Used Curtis 1204-015 controller | Golf Carts and Parts | |||
| looking for a 1204-009 controller | Golf Carts and Parts | |||
| Curtis 1204-001 controller | Golf Carts and Parts | |||
| WTB CC 1204-410 Controller | Golf Carts and Parts | |||
Linear Mode
