Soundbar and lights wiring

Edamos · 05-16-2022, 10:03 AM

Great idea for the mount. Do you happen to remember how thick a piece you used. I don't want it flexing, but at the same time I don't want to go to thick. I can get 2" x 36" and cut the length, but it comes in 1/8" increments up to 1" thick.
Thanks

trevorg7 · 05-17-2022, 07:42 AM

Quote:

Originally Posted by Edamos

Great idea for the mount. Do you happen to remember how thick a piece you used. I don't want it flexing, but at the same time I don't want to go to thick. I can get 2" x 36" and cut the length, but it comes in 1/8" increments up to 1" thick.
Thanks

The stainless steel mount is only 1/8" think. It doesn't flex at all, extremely solid.

Trevor

05-16-2022, 10:03 AM	#11
Edamos Not Yet Wild Join Date: Nov 2021 Location: Boca Raton Posts: 21	Re: Soundbar and lights wiring Great idea for the mount. Do you happen to remember how thick a piece you used. I don't want it flexing, but at the same time I don't want to go to thick. I can get 2" x 36" and cut the length, but it comes in 1/8" increments up to 1" thick. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Best Soundbar?	Electric EZGO
Help wiring 48v to 12v for lights head and tail lights	Electric EZGO
Wiring for Head ligths, Tail Lights, Brake Lights and Turn Signals	Gas EZGO
Wiring lights and a winch? Use a converter or hard wiring?	Electric EZGO
Wiring lights and a winch? Use a converter or hard wiring?	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum