|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-23-2015, 06:47 PM | #1 |
Not Yet Wild
Join Date: Sep 2015
Posts: 2
|
Issue with Madjax Genesis 150
Hi, I just purchased a 2013 Precedent and had Genesis 150 rear flip seat installed. I have watched the two videos online and looked at the instructions for installation but cannot find the answer to my issues.
I am worried the brackets holding the seat backs are not properly installed. The front seat is raised about 2 inches higher than the normal stock seat location and is terribly uncomfortable. Furthermore, there are bolts installed into the top holes for the front seat but none in the lower holes. The holes in the bottom location on the seat bracket do not line up with the holes on the seat. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-23-2015, 10:06 PM | #2 | |
Gone Wild
Join Date: Jul 2015
Location: Alpharetta, GA
Posts: 226
|
Re: Issue with Madjax Genesis 150
Quote:
If this doesn't help, let me know and I will get you a person to speak with at Madjax about it. |
|
09-24-2015, 06:23 AM | #3 |
Not Yet Wild
Join Date: Sep 2015
Posts: 2
|
Re: Issue with Madjax Genesis 150
Thanks for the response but the 250 has completely different brackets.
|
09-24-2015, 10:20 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Issue with Madjax Genesis 150
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone using a madjax lift | Electric Club Car | |||
Anyone Use the MADJAX lightbar? | Electric Club Car | |||
Madjax 3.5 Lift kit | Electric Club Car | |||
Madjax A arm kit | Lifted Golf Carts |