Lift kit recommendation and questions for CC Precedent

the spindle lift needs the clearance on the 10" rim
the stock rims will not fit the lift spindles due to the curve of the spindles
this is the 6" jakes kit


note:
you could use 1/2" wheel spacers to use stock rims

[Epb]

You would uograde torque with controller to handle the larger tires. The cables are to carry the amperage to support the torque.
here is jakes data 3"
Jake's 3" Tire & Wheel Size 20x10x10 (Stock Wheels & Tires will work, but not recommended)Comes with detailed instructions and all necessary hardware*
if you do go larger wheels i woukd go 12". I have 10" and want bigger tires and selection is limited. I plan to go from 22" to 25" in the rear. My upgraded torque motor will handle it and my SPEED will increase!
E