|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-10-2016, 05:02 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
|
Key start
Anyone have a guide on how to bypass pedal switch to just key switch? Thanks.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-10-2016, 05:46 PM
|
#2 |
|
VC 460 CLONE GONE WILD
 Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,628
|
Re: Key start
Under the floor board there is a connector that goes to the pedal switch.Just jump it back towards the engine. Really easy on a yamaha.
|
|
|
|
|
04-10-2016, 06:27 PM
|
#3 |
|
Getting Wild
Join Date: Dec 2015
Posts: 111
|
Yes flip pedal switch and then adjust the idle.
Sent from my iPhone using Tapatalk |
|
|
|
|
04-10-2016, 08:43 PM
|
#4 |
|
Gone Wild
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
|
Re: Key start
When u say jump ur back to engine what do mean.? Like run another wire to the other on pedal switch like tie them together?
|
|
|
|
|
04-10-2016, 08:46 PM
|
#5 |
|
Gone Wild
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
|
Re: Key start
Anyone got pic or diagram?
|
|
|
|
|
04-10-2016, 08:49 PM
|
#6 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,628
|
Re: Key start
Just connect the 2 wires from the engine together.I just looped a piece of wire into the plug to see if I liked just using the key switch.
|
|
|
|
|
04-10-2016, 08:50 PM
|
#7 |
|
Getting Wild
Join Date: Dec 2015
Posts: 111
|
All I did unscrew it and turn it over screw it back down. This is on a g16.
Sent from my iPhone using Tapatalk |
|
|
|
|
04-19-2016, 02:48 PM
|
#8 |
|
Gone Wild
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
|
Re: Key start
Forgot to mention this is on a clone engine from Vegas carts. Now I jumped the wires but the cart idle must be to high because the cart starts moving. I turned idle screw down all the way but it still engages. Anyone have recommendation on a solution? How to lower the rim engagement of the clutch or even on the motor?
|
|
|
|
|
04-19-2016, 04:16 PM
|
#9 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,628
|
Re: Key start
Are you using the comet 780?
|
|
|
|
|
04-21-2016, 12:26 PM
|
#10 |
|
Gone Wild
Join Date: Jul 2014
Location: Long Beach, CA
Posts: 327
|
Re: Key start
Yes
|
|
|
|
|
| Tags |
| key start |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| How do I wire start and run with a key instead of pedal start/stop | Gas Club Car | |||
| Converting from pedal start to key start | Gas Club Car | |||
| need to change carryall IV key start to pedal start | Gas Club Car | |||
| whats the difference between a key start and pedal start fe350ccw? | Gas Club Car | |||
| E-Z GO Has Trouble to Start Randomly and Now It Will Not Start | Electric EZGO | |||
Linear Mode
