|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-09-2017, 01:08 AM | #11 |
Gone Wild
Join Date: Dec 2016
Location: Alaska/SoCal
Posts: 549
|
Re: G16 slow start and no power going uphill
Gonna be a G16 Golf cart guru with all you worked thru
Let us know how the new controller works out Quite a few following your troubleshooting Nice to read the final chapter with a good ending Helps others with similar problems |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-06-2017, 08:39 AM | #12 |
Not Yet Wild
Join Date: Mar 2014
Posts: 10
|
Re: G16 slow start and no power going uphill
Just a quick follow up. I sent the controller to Jason's golf carts for a rebuild. Quick turnaround and I think it was just north of $200. The cart runs great now.
|
04-07-2017, 01:46 AM | #13 |
Gone Wild
Join Date: Dec 2016
Location: Alaska/SoCal
Posts: 549
|
Re: G16 slow start and no power going uphill
Thanks for the update
Did a G-14 with a rebuilt controller right before I headed back to AK. Ran ok, not a speedster. Nice looking golf cart I've read that the g14 & g16 have weak controllers & F/R switches . Look like they'd be nice carts to upgrade to 48 v Leave the 36 volt motor, add 48v controller, solonoid , get good speed & torque |
04-16-2017, 08:29 AM | #14 |
Not Yet Wild
Join Date: Apr 2017
Posts: 3
|
Re: G16 slow start and no power going uphill
I have a very similar issue with my cart, and would like to try bypassing the Controller. However, my motor's markings are near-impossible to read. Can you please tell me which is the A2 post, as seen from the battery compartment? Is it the outer post on top, or on bottom? Thanks in advance.
|
04-17-2017, 08:47 AM | #15 | |
Not Yet Wild
Join Date: Apr 2017
Posts: 3
|
Re: G16 slow start and no power going uphill
Quote:
|
|
04-18-2017, 09:49 AM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 slow start and no power going uphill
A1 & A2 are the terminals closest to end of motor.
|
04-18-2017, 10:55 AM | #17 |
Not Yet Wild
Join Date: Apr 2017
Posts: 3
|
Re: G16 slow start and no power going uphill
Understand that the A posts are toward the end of the motor. My question is, when the motor is installed in the cart, is the A2 post on top or on the bottom?
Thanks again! |
12-17-2020, 01:12 PM | #18 |
Not Yet Wild
Join Date: Nov 2020
Posts: 1
|
Re: G16 slow start and no power going uphill
I’ve got the exact same issues with my g16e. I’ve tried everything and even the test for the motor that you wrote about. Got full immediate power same as you. Did you replacing the controller solve your issues. Any help is appreciated
Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
Slow uphill | Gas Columbia ParCar | |||
How slow should I be uphill? | Electric Club Car | |||
where to start? uphill power 1979 ez go | Electric EZGO | |||
slow uphill | Electric Club Car | |||
slow uphill | Electric Club Car |