|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-01-2019, 10:04 PM | #1 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
2010 txt tie rod removal
I’m trying to remove the outer tierod. I had it off when installing my lift and think maybe the nut iscross threaded. When I try to take it off, the whole “bolt” rotates. Have tried holding it with vice grips but it doesn’t stop from rotating. Is a cutting wheel my only option?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-01-2019, 10:06 PM | #2 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
Re: 2010 txt tie rod removal
Added a pic in my profile for reference
|
01-02-2019, 02:54 AM | #3 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: 2010 txt tie rod removal
try whacking the tie rod end back into the taper with a mallet to secure it and the nut should come off fine.
|
01-02-2019, 06:14 AM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 2010 txt tie rod removal
Put a C clamp on it, to put pressure on the tie rod end. And push it back into the taper. Then it should stop spinning.
|
01-02-2019, 09:53 AM | #5 |
Gone Wild
Join Date: Oct 2013
Posts: 413
|
Re: 2010 txt tie rod removal
I had the same problem several years ago and that was when I finally broke down and bought an impact wrench. I was able to press it against a concrete block and get it off. You have got to somehow get the shoulders back into place. Good luck
|
01-02-2019, 11:07 AM | #6 |
Not Yet Wild
Join Date: Jan 2019
Posts: 3
|
Re: 2010 txt tie rod removal
Awesome. Thanks for the ideas. I’ll give them a shot tonight.
|
01-03-2019, 07:53 AM | #7 |
Gone Wild
Join Date: Nov 2018
Location: Texas
Posts: 284
|
Re: 2010 txt tie rod removal
You can buy a small tie rod fork from Autozone for around $20.
Or like others said, do something to get the shoulder wedged back in the hole. Just remember, if you have to drive the tie rod end out after you remove the castle nut, put the castle nut back on atleast 2-3 threads so when you hit it with a hammer your don't mess up the threads. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 Tomberlin Bushing Removal | Tomberlin | |||
tie rod removal help | Electric EZGO | |||
air box removal | Gas Yamaha | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Electric EZGO | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Gas EZGO |