RXV Accelerator Return Cable Snapped

bigsby · 08-22-2019, 06:05 PM

It appears the small cable that attaches the return spring to the accelerator pedal on my 2014 rxv has snapped. Does anyone have a replacement part number on hand, or a link to a parts diagram I can look it up?

Sent from my Pixel 2 XL using Tapatalk

usgicollector · 08-22-2019, 06:46 PM

That question has been ask many times here. EZGO said that they never put them on any RXV carts. They have only been found on Fleet cart. So what is believed third party Fleet distributor or something like that installed them.

bigsby · 08-22-2019, 09:57 PM

That's too bad there are no replacements. I first tried the rubber hose idea I had seen Bob Boyce mention on the ends of the spring to tighten the spring, but that still was not strong enough to consistently return the pedal to the full upright position. So I made my own return cable with some braided wire and crimps. Time will tell if it lasts or not.

Sent from my Pixel 2 XL using Tapatalk

cgtech · 08-23-2019, 03:19 AM

These are the craziest things I ever seen for electric ezgos! Maybe belongs in the gas section...

If I had only known ...

Can't stand the kawi ezgos, might as well buy a clubcar.

Yamaha gassers for ever! Never buy a gasser that isn't Yamaha!

bigsby · 08-23-2019, 07:25 AM

This is an electric EZGO...

Sent from my Pixel 2 XL using Tapatalk

almo1010 · 01-08-2023, 02:40 PM

My fix was similar. The 2011 model had a loop of wire that broke. I got another new piece of stainless wire, as big as would fit in the notch.

I got the length for the new wire from the old loop and wound the new wire into the old loop and soldered it, along the entire length of both legs of the loop. That way, the original metal ball stays attached.

You really need the flux. It will never work without that.

08-22-2019, 06:05 PM	#1
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18	RXV Accelerator Return Cable Snapped It appears the small cable that attaches the return spring to the accelerator pedal on my 2014 rxv has snapped. Does anyone have a replacement part number on hand, or a link to a parts diagram I can look it up? Sent from my Pixel 2 XL using Tapatalk
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18

08-22-2019, 06:46 PM	#2
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,235	Re: RXV Accelerator Return Cable Snapped That question has been ask many times here. EZGO said that they never put them on any RXV carts. They have only been found on Fleet cart. So what is believed third party Fleet distributor or something like that installed them.

08-22-2019, 09:57 PM	#3
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18	Re: RXV Accelerator Return Cable Snapped That's too bad there are no replacements. I first tried the rubber hose idea I had seen Bob Boyce mention on the ends of the spring to tighten the spring, but that still was not strong enough to consistently return the pedal to the full upright position. So I made my own return cable with some braided wire and crimps. Time will tell if it lasts or not. Sent from my Pixel 2 XL using Tapatalk
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18

08-23-2019, 03:19 AM	#4
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: RXV Accelerator Return Cable Snapped These are the craziest things I ever seen for electric ezgos! Maybe belongs in the gas section... If I had only known ... Can't stand the kawi ezgos, might as well buy a clubcar. Yamaha gassers for ever! Never buy a gasser that isn't Yamaha!

08-23-2019, 07:25 AM	#5
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18	Re: RXV Accelerator Return Cable Snapped This is an electric EZGO... Sent from my Pixel 2 XL using Tapatalk
bigsby Not Yet Wild Join Date: Aug 2018 Posts: 18

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-08-2023, 02:40 PM	#6
almo1010 Not Yet Wild Join Date: Jun 2018 Posts: 2	Re: RXV Accelerator Return Cable Snapped My fix was similar. The 2011 model had a loop of wire that broke. I got another new piece of stainless wire, as big as would fit in the notch. I got the length for the new wire from the old loop and wound the new wire into the old loop and soldered it, along the entire length of both legs of the loop. That way, the original metal ball stays attached. You really need the flux. It will never work without that.
almo1010 Not Yet Wild Join Date: Jun 2018 Posts: 2

Similar Threads
Thread	Forum
Accelerator return spring	Electric Club Car
RXV Accelerator Return Spring	Electric EZGO
Brake cable snapped, disc brake conversion?	Electric EZGO
Accelerator Cable	Gas Club Car
Accelerator Cable	Gas EZGO