|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-23-2019, 12:08 PM | #1 |
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
RXV Bushings
I've been chasing some suspension squeaks in my 2013 RXV and will replace the leaf spring bushings. They are probably due anyway. The bushings on the cart appear to be a hard plastic yet most of the replacement bushing sets I've looked at say they are rubber. Is there a difference or a preference of one over the other? Also, I'm probably due to replace the A-arm bushings as well. How do I go about doing that? I've seen the videos on the leaf spring bushings. Pretty straight forward but found nothing on the A-arm procedure. Any tricks to those?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2019, 02:53 PM | #2 |
Gone Wild
Join Date: Feb 2017
Location: Peachtree City, Georgia
Posts: 225
|
Re: RXV Bushings
the A-Arm bushing are pretty easy, there is a set on either side. lift the front of cart, remove the tire. Remove the bolt that connects the a-arm and strut, its 15mm. push out carrier tube and then bushing. press in new bushing and carrier tube and re-attach strut. your done.
|
08-23-2019, 04:35 PM | #3 |
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: RXV Bushings
Thanks, Phil_Billy!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Bushings for g-8 | Electric Yamaha | |||
Bushings | Electric EZGO | |||
Leaf spring bushings, do they make polyurethane bushings? | Gas Club Car | |||
Bushings all around.... | Electric Club Car | |||
Bushings | Electric EZGO |