|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-14-2020, 11:39 AM | #1 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
2001 EZGO PDS No solenoid click
No solenoid click on 2001 PDS. Cart came in no go. Rpl solenoid no click. checked all wiring, rpl ITS and bypassed key switch. Rpl controller still no go.
Verified all wiring to motor and controller, simply put I am Stumped. Anyone have any ideas? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2020, 11:58 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO PDS No solenoid click
Put PDS controller in diagnostic mode and listen for beeped error codes.
Text at bottom of label tell how to get into diagnostics. |
05-14-2020, 01:29 PM | #3 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 2001 EZGO PDS No solenoid click
tried but no diagnostic codes. Cart had alltrax controller but replaced it with curtis 1206mx controller. no diagnostic codes.
|
05-14-2020, 03:01 PM | #4 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 2001 EZGO PDS No solenoid click
now cart crawls, good reverse signal but very slow in forward and reverse. and solenoid still does not operate
|
05-14-2020, 03:53 PM | #5 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO PDS No solenoid click
Quote:
What is the voltage on J1 Pin-4. Should be full battery pack voltage (38.2 when fully charged). |
|
05-15-2020, 07:26 AM | #6 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 2001 EZGO PDS No solenoid click
36.74 , pack voltage
|
05-15-2020, 11:49 AM | #7 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO PDS No solenoid click
Here is a drawing showing how the pack voltage that enters on J1 Pin-4 goes through the PDS controller several times to get to the yellow wire on the solenoid's coil.
Plus a picture with Pin-1 on all the jacks highlighted. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 ezgo will not start has no solenoid click | Gas EZGO | |||
2001 ezgo 36v no solenoid click | Electric EZGO | |||
ezgo pds no click on the solenoid | Electric EZGO | |||
98 ezgo solenoid no click | Electric EZGO | |||
2001 ezgo txt will click but not run | Electric EZGO |