|
08-26-2009, 08:39 PM
|
#1 |
|
Getting Wild
Join Date: Jun 2009
Posts: 84
|
Oil Injection
I have an 88 Ezgo 2 cycle with the oil injector still on it.It works fine , but my resivor is getting low, and now would be a good time for it to go.
I've read plenty of threads that say take it off, and mix the gas. The questions I have are, the bolt in the top of the intake , does it need to be replaced, or can I use the bolt on it. I know it has a hole in it for the oil to pass threw. And I've read that the gas to oil ratio should be 100 to 1 is this a good mixture? Thanks for all the geat tips |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-26-2009, 10:10 PM
|
#2 |
|
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: Oil Injection
1: Take the screw out and go to the hardware store and match up a regular screw to plug the hole.
2: 100:1 for golf course use 75:1 for campground duty 60:1 for severe duty/off roading Get out there and get carting......  |
|
|
|
|
08-27-2009, 03:10 AM
|
#3 |
|
Getting Wild
Join Date: Jun 2009
Posts: 84
|
Re: Oil Injection
Thanks for the reply. I'll get that changed over today.
|
|
|
|
|
08-27-2009, 06:45 AM
|
#4 |
|
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: Oil Injection
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Delete oil injection and rum mixed gas | Gas EZGO | |||
| 81 G1 oil injection going BYE,BYE | Gas Yamaha | |||
| 1989 ez-go oil injection removal | Gas EZGO | |||
| oil injection | Gas EZGO | |||
| oil injection filter replacement | Gas EZGO | |||
Linear Mode
