What are these and where do they go?

rcbipeflyer · 09-28-2009, 08:35 PM

Ken,
These are the wrist pin spacers. I just tore mine apart last evening and checked the parts bag to make sure that's what they are.

mudtrux · 09-30-2009, 03:57 PM

Thats what I was thinkin on my way out of town. We started and ran it even drove it around. I had to call him and say STOP RUNNIN IT!

THANKS hawkeyedm2003 and rcbipeflyer for the confirmation!

mudtrux · 09-30-2009, 03:59 PM

Now can we get the jug off it with the engine in the chassis?

I'm a little far away from it at he minute

hawkeyedm2003 · 09-30-2009, 04:14 PM

Quote:

Originally Posted by mudtrux

Now can we get the jug off it with the engine in the chassis?

If you can, I want to see some pics of that.
Good Luck, and you're welcome!

mudtrux · 10-16-2009, 07:52 PM

Engine assy. came back out and got them in without wrecking any gaskets.

tonyton · 10-16-2009, 11:05 PM

Oh, the 2 stroke motor....That's why there's no balancer shaft...

Most 2 strokes dont have wristpin spacers. I had never seen that before. Thanks for the education, I mean information!
I found a a parts manual to see for my own piece of mind and there they were. The piston in the cylinder stops side to side play on some motors. The diagram looks like the bearing is wider than the rods and those hold it in place. I never would have thought that.
Heres a parts manual.http://bennettgolfcars.ca/parts.php

09-28-2009, 08:35 PM	#11
rcbipeflyer Not Yet Wild Join Date: Sep 2009 Location: Middletown, Pa. Posts: 35	Re: What are these and where do they go? Ken, These are the wrist pin spacers. I just tore mine apart last evening and checked the parts bag to make sure that's what they are.

09-30-2009, 03:57 PM	#12
mudtrux Gone Wild Join Date: Sep 2007 Location: Central Mn Posts: 270	Re: What are these and where do they go? Thats what I was thinkin on my way out of town. We started and ran it even drove it around. I had to call him and say STOP RUNNIN IT! THANKS hawkeyedm2003 and rcbipeflyer for the confirmation!

09-30-2009, 03:59 PM	#13
mudtrux Gone Wild Join Date: Sep 2007 Location: Central Mn Posts: 270	Re: What are these and where do they go? Now can we get the jug off it with the engine in the chassis? I'm a little far away from it at he minute

10-16-2009, 07:52 PM	#15
mudtrux Gone Wild Join Date: Sep 2007 Location: Central Mn Posts: 270	Re: What are these and where do they go? Engine assy. came back out and got them in without wrecking any gaskets.

10-16-2009, 11:05 PM	#16
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: What are these and where do they go? Oh, the 2 stroke motor....That's why there's no balancer shaft... Most 2 strokes dont have wristpin spacers. I had never seen that before. Thanks for the education, I mean information! I found a a parts manual to see for my own piece of mind and there they were. The piston in the cylinder stops side to side play on some motors. The diagram looks like the bearing is wider than the rods and those hold it in place. I never would have thought that. Heres a parts manual.http://bennettgolfcars.ca/parts.php Last edited by tonyton; 10-16-2009 at 11:34 PM.. Reason: add manuals

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum