|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-05-2011, 03:58 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2011
Posts: 1
|
g14 camber issue
Hello, About a year ago a friend of mine gave me his stock shocks off the front of his quad. So I decided to throw them on the rear of the cart. Then I took the stock rears and threw them on the front to even it out. It lifted it a few inches. Rides pretty good, still stears alright. The problem is the front is camber like this \ / and looks kinda goofy. Anyone know if there is aftermarket spindels with a different angle. Also thought about lowering the a arm mounts. Any thoughts or ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-05-2011, 05:08 PM
|
#2 |
|
Gone Wild
 Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: g14 camber issue
 Every Yamaha in the area is like that? good luck on a cure i will watch and see. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Excessive camber-New to me CC | Electric Club Car | |||
| Allsports A-Arm Camber | Lifted Golf Carts | |||
| camber question | Lifted Golf Carts | |||
| G1 camber?!? | Gas Yamaha | |||
| Alignment (Camber) | Electric Club Car | |||
Linear Mode
