Ezgo Series Car no solenoid click

[JohnnieB]

Originally Posted by FF Titus

On the switch F&R, closest to the batteries is the baby blue colored wire that comes from the solenoid. Next over to that to it's left is the other baby blue colored wire from the keyswitch, on the same plug or "spade" is a red jumper wire going to the next switch.

On the other switch it has the red jumper which is screwed in since it has an eyelet on it, then on the end is an orange wire, with the reverse buzzer red wire under it.

I think this is a schematic for the cart you are working on.

----------
If you are getting 22V on the blue wire on the key-switch, the problem is one of the two blue wires going to/from microswitch on F/R assembly (MS-2), or the microswitch they are attached to.

[FF Titus]

That looks exactly like the model I am working on Johnnie. The voltage fluctuates from 19V to 22V.

Should I run jumper wires to see if the blue wires themselves are bad? I added a new microswitch and I go no change.

[JohnnieB]

I'm not very fond of using jumper wires to troubleshoot, but they do come in handy to confirm what one finds with a voltmeter.

I'd replace (jump) the blue wire from battery side main terminal on solenoid to MS-2 first.
Then the blue wire from MS-2 to key switch if that doesn't solve problem.