|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-08-2012, 05:42 PM | #1 |
Not Yet Wild
Join Date: Aug 2012
Location: SC
Posts: 48
|
01 EZGO wont do nothing
I have a 01 ez go pds 36 volt i took apart to paint. it worked fine before we took it apart. now we put it back together i hook up the negative battery cables and it does nothing no reverse beeper no solonoid click when i press the accelerator. tryed new solenoid still nothing. batteries have 37 volts both lugs on solonoid have 37volts what could cause the reverse beeper not to work?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-08-2012, 05:47 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 01 EZGO wont do nothing
Follow this diagram starting at the charge receptacle,
Red lines are 36v+ flow Blue is 36v- to the solenoid. |
08-08-2012, 09:03 PM | #3 |
Not Yet Wild
Join Date: Aug 2012
Location: SC
Posts: 48
|
Re: 01 EZGO wont do nothing
thankd for the diagram i traced the wires and found the reed switch bad replaced it that got the back up beeper working but still no solonoid click. i put a test light on the negative battery cable and the frame and the solonoid the metal piece the controller bolts to all have power until you turn the run tow switch to tow then the test light slowly goes dim
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help EZGO Wont go EZ | Electric EZGO | |||
EZGO wont run | Electric EZGO | |||
94 EZGO wont go | Electric EZGO | |||
87 ezgo wont run | Electric EZGO | |||
ezgo wont go | Electric EZGO |