|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-19-2013, 09:50 AM | #1 |
Not Yet Wild
Join Date: Apr 2013
Location: Indiana
Posts: 15
|
Brake Cable Question
Hello,
Ok, im helping a buddy of mine lift his 2009 PDS, 5" axle drop lift. Got front done, no problem. Went to back and started putting the lift blocks in, went to release the brake cables from the back of the drums. Passenger side was ok, but when we took the drivers side off we heard a pop or a bang. Went to put the cable back on after the block install, the passenger side went on no problems, but the drivers seems too short now. Im wondering what we did wrong. Any suggestions on how we can get the brake cable back on? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
08 CC brake cable | Electric Club Car | |||
Brake cable trouble | Electric EZGO | |||
WTB - Melex brake cable | Golf Carts and Parts | |||
brake cable | Electric EZGO | |||
Is my brake cable to short. | Lifted Golf Carts |