Trying to figure out speed used precedent

[07ClubPrecedent]

Originally Posted by TahoeDawgZ71

No. I prefer the speed magnet over the high speed code. The speed code is gonna keep you from going faster than 19.6mph but the magnet won't. All high speed motors for the IQ system use a high speed magnet. That's how they keep the controller from slowing the cart down.

Good deal, thanks!

[TahoeDawgZ71]

Originally Posted by ProSouth

Would it be the same for the Excel gray controllers ? Have 3 to upgrade and they
Are not on the speed code 4

No. Excel cars will reject the speed magnet and go slower.

[07ClubPrecedent]

One last question on the magnets what is the average top speed on flat ground with them usually?

[TahoeDawgZ71]

22mph or so

[ProSouth]

Originally Posted by TahoeDawgZ71

No. Excel cars will reject the speed magnet and go slower.

Thanks was afraid of that , So for speed on Excel its controller upgrade with motor package only? , too bad I can't just swap controllers as I have 2
That are black/IQ

[teecro]

Originally Posted by ProSouth

Would it be the same for the Excel gray controllers ? Have 3 to upgrade and they
Are not on the speed code 4

Excel carts will gain nothing from speed magnets....

[TahoeDawgZ71]

Originally Posted by ProSouth

Thanks was afraid of that , So for speed on Excel its controller upgrade with motor package only? , too bad I can't just swap controllers as I have 2
That are black/IQ

You can gain a little speed with a high speed code. You can swap the controllers if you change the main vehicle wire harness to that of an IQ car of the same year. Then you'll benefit from a magnet.