Will there need to be a change?

TAT · 10-06-2014, 10:07 PM

I did my conversion from the resistor style to the scottyb conversion. 94 cc ds. Not sure how the other guy had the charging receptacle hooked up but,do all I need to hook up is pos to pos in and neg to neg out. Only two wires from charging receptacle? Just wondering if I'm missing anything before I hook that part back up. Almost seems to simple or am I over thinking this? Wasn't sure which sticky to look at since it's a 94 converted over to controller and all that good stuff. Thanks,TAT

jakesnake27 · 10-06-2014, 10:42 PM

I've never done a conversion, but I think that's how it works...
Do you have an automatic charger?

TAT · 10-06-2014, 10:44 PM

Yes, it shuts off after it's fully charged.if standing behind the receptacle (where I plug in my charger to) which side is pos and which side is neg?

scottyb · 10-06-2014, 10:46 PM

yes 2 wires, one main (+) and one main (-)

Simple-laro

TAT · 10-06-2014, 10:54 PM

Ok I thought I was reading that right! Nice conversion scottyb! Thanks again. On back of charging receptacle( looking from behind it,which side is pos and neg?

Epb · 10-07-2014, 05:48 AM

Look in the stickies....but, i would look at charger plug and wire receptacle to match. You may have a converted charger too.

jjance · 10-07-2014, 07:39 AM

Best way to tell which is pos and which is neg is to put your meter on it.

10-06-2014, 10:07 PM	#1
TAT Gone Wild Join Date: Sep 2014 Location: Texas Posts: 194	Will there need to be a change? I did my conversion from the resistor style to the scottyb conversion. 94 cc ds. Not sure how the other guy had the charging receptacle hooked up but,do all I need to hook up is pos to pos in and neg to neg out. Only two wires from charging receptacle? Just wondering if I'm missing anything before I hook that part back up. Almost seems to simple or am I over thinking this? Wasn't sure which sticky to look at since it's a 94 converted over to controller and all that good stuff. Thanks,TAT

10-06-2014, 10:42 PM	#2
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: Will there need to be a change? I've never done a conversion, but I think that's how it works... Do you have an automatic charger?
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

10-06-2014, 10:44 PM	#3
TAT Gone Wild Join Date: Sep 2014 Location: Texas Posts: 194	Re: Will there need to be a change? Yes, it shuts off after it's fully charged.if standing behind the receptacle (where I plug in my charger to) which side is pos and which side is neg? Last edited by TAT; 10-06-2014 at 10:49 PM.. Reason: Ask another question

10-06-2014, 10:54 PM	#5
TAT Gone Wild Join Date: Sep 2014 Location: Texas Posts: 194	Re: Will there need to be a change? Ok I thought I was reading that right! Nice conversion scottyb! Thanks again. On back of charging receptacle( looking from behind it,which side is pos and neg?

10-07-2014, 05:48 AM	#6
Epb Gone Wild Join Date: Mar 2012 Location: Katy, Tx Posts: 1,027	Re: Will there need to be a change? Look in the stickies....but, i would look at charger plug and wire receptacle to match. You may have a converted charger too.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-07-2014, 07:39 AM	#7
jjance Gone Wild Join Date: Feb 2011 Location: Chattanooga TN Posts: 2,105	Re: Will there need to be a change? Best way to tell which is pos and which is neg is to put your meter on it.

Similar Threads
Thread	Forum
Oil change	Gas Club Car
oil change	Gas Club Car
Oil change	Gas Club Car
oil change	Gas Club Car