lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-20-2016, 04:00 PM   #1
imtxn
Not Yet Wild
 
Join Date: Apr 2016
Posts: 2
Default calibration/test module adaptor

Hey, Am looking for the pin out for the wiring adaptor (club car #1018945-01) which connects the rectangular 3 pin plug on Cal/Test Module to the triangular 3 pin plug on the cart. $65.00 + S/H for two plugs and three 2 inch wires is a bit excessive especially since I have the parts to fab this on hand.
We need this adaptor to calibrate a new accelerator system previously installed on our carryall 6.
Thanks eh,
Imtxn
imtxn is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wheel spacer/adaptor Lifted Golf Carts
Clutch calibration Big Block Talk!
SOC Calibration Electric EZGO
Anyone know where the flip this adaptor plugs into....? Gas Club Car
How do you test the HEI module? Gas EZGO


All times are GMT -5. The time now is 06:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.