ezgo gas robins eh29c no power on hills

[big mule]

Originally Posted by ford

k ordered from them cant wait to try it thanks big mule for the help

You're very welcome & please update when you get it installed.

[ford]

big mule I got new clutch but I tried moving each side back n forth it moves like the old one I took off your thoughts ? ok I put new one on an its better but still not quite right the old one would barley haul one adult up hill but now it will crawl slowly up hill one person I mean it help but not goin to haul 2 or 3 people yet what u think

[big mule]

Originally Posted by ford

big mule I got new clutch but I tried moving each side back n forth it moves like the old one I took off your thoughts ? ok I put new one on an its better but still not quite right the old one would barley haul one adult up hill but now it will crawl slowly up hill one person I mean it help but not goin to haul 2 or 3 people yet what u think

Honestly I'm stumped on a new driven clutch being that easy to move by hand because it should be very hard to "twist" by hand.By the way did you happen to see this thread (sticky in Ezgo gas section)? Click here.......> http://www.buggiesgonewild.com/ezgo-...en-clutch.html

[ford]

I got the shorter belt I'm goin out to try it now but was wondering I thought I read some where where u load the clutch is that something or what I can turn new clutch half turn its not real easy but I can do it with bare hands

[big mule]

Originally Posted by ford

I got the shorter belt I'm goin out to try it now but was wondering I thought I read some where where u load the clutch is that something or what I can turn new clutch half turn its not real easy but I can do it with bare hands

"use 120 degrees of preload, and the middle spring setting" (copied from post # 20 in shorter belt thread) is referring to part of the driven clutch reassembly after rebuilding;it has 3 different spring seat holes that can be chosen while the clutch is taken apart by removing the snap ring & cam EXTREME CAUTION MUST BE USED WHEN SNAP RING IS REMOVED TO AVOID SERIOUS INJURY FROM SPRING LOADED FLYING PARTS!! I would try the shorter belt since a new clutch should be ready to go with no adjustments.

[ford]

big mule I went out an put 1 inch shorter belt on it runs a lot better hauls wife an I up hill a lot better didn't have boy on lil cold here but totally different cart only thing I notice on the hill is the front clutch is slipping on belt but its a huge improvement what u think thanks u getting closer lol

[big mule]

That is great to hear.I wonder if a new or stronger (torque) spring in your drive (front) clutch would complete the fix(?),hopefully somebody else will chime in with opinion.

[big mule]

Originally Posted by ford

big mule I went out an put 1 inch shorter belt on it runs a lot better hauls wife an I up hill a lot better didn't have boy on lil cold here but totally different cart only thing I notice on the hill is the front clutch is slipping on belt but its a huge improvement what u think thanks u getting closer lol

If you get a chance take a peek at this thread as well and see if it gives you any help on checking it out link ........> http://www.buggiesgonewild.com/gas-e...h-problem.html

[ford]

big mule I took front clutch apart it was full of real fine dust I cleaned n blew it with air compressor cleaned it all up put it all back together an put shorter belt on an wow its a totally new cart haul four of us no problem anywhere thanks for helpin me with this u helped made a lil disabled boy happy he made several laps in yard lol thanks

[big mule]

Now that's what it's all about!!!!I am so glad you got it going for him and honored that I could help a little bit along the way .Just be careful & safe climbing up steep hills with the extra torque provided by the short belt & 28* clutch.Have fun & enjoy all the smiles!!