|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-31-2018, 03:42 PM | #1 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
First time Alltrax install..
Please forgive my ignorance but which is the proper way to attach cables to the controller? The first way seems to have spring to it and not a solid connection.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2018, 03:55 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: First time Alltrax install..
The lug goes on top of the metal tab.
Keep pressure downward when You are tightening so the nut stays captive in the recess provided and does not twist. The springing action you are feeling is fine since the electrical connection is between the lug and the thin tab itself. |
10-31-2018, 03:56 PM | #3 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: First time Alltrax install..
Thanks again Sergio!
Sent from my iPhone using Tapatalk |
11-01-2018, 12:20 AM | #4 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: First time Alltrax install..
I had a terrible time doing this I hope you make out better than I did. Good luck buddy.
|
11-01-2018, 06:47 AM | #5 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: First time Alltrax install..
Ohh yeah? What were some of the issues you ran into?
Sent from my iPhone using Tapatalk |
11-01-2018, 06:49 AM | #6 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: First time Alltrax install..
|
11-01-2018, 09:23 AM | #7 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: First time Alltrax install..
The diodes make sure they are correct with the stripe on the correct side. And I had the motor wires reversed.
|
11-01-2018, 09:50 AM | #8 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
First time Alltrax install..
I’m doing the 500 XCT with the 400 amp solenoid..doesn’t that one only have the one diode?
Sent from my iPhone using Tapatalk |
11-01-2018, 10:05 AM | #9 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: First time Alltrax install..
Quote:
The second diode is larger... it comes with every Ezgo and CC XCT controller with instructions to put it on the large terminals. In this application the striped end (+) goes toward the post with the main positive battery cable attached. I hope this helps |
|
11-01-2018, 10:10 AM | #10 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
Re: First time Alltrax install..
It does and thanks again Scotty. I hate to keep bothering you with every little question. Anyone reading this and considering doing this upgrade I highly recommend getting your setup from ScottyB @ carts unlimited! First rate service all the way!
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
First time installing an Alltrax XCT 300 Controller | Electric Club Car | |||
Alltrax controller installation time | Electric Club Car | |||
Install time for Jake's Long Travel? | Lifted Golf Carts | |||
Trying to install a 12v Power Inverter fro one time use - Where to connect? | Electric EZGO | |||
Install time? | Electric EZGO |