|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-21-2019, 12:19 PM | #1 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Thread size Tie rod end
Hello,
Want to know what thread size the tie rods (left and right handed) are I want to clean the inside thread with a tap. The original part numbers are : EZGO 18375-G1 EZGO 18375-G2 EZGO 20795-G2 EZGO 27205-G02 EZGO 30922-G1 EZGO 50165-G1 EZGO 7042024 EZGO 18375-G1 EZGO 20795-G1 EZGO 27205-G01 EZGO 30923-G1 EZGO 50210-G1 Thanks and greetings, Erik. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2019, 03:52 AM | #2 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: Thread size Tie rod end
Help.....
|
11-26-2019, 04:08 PM | #3 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: Thread size Tie rod end
Finally...
Is is 9/16-12... Greetings, Erik. |
11-26-2019, 04:36 PM | #4 |
Gone Wild
Join Date: May 2019
Location: Georgia
Posts: 389
|
Re: Thread size Tie rod end
it may be cheaper just to buy a new tie rod instead of 2 special taps...IDK
I used old male threaded items and create my on Tap by grinding a slit down the length & grinding a angle onto the end, than verifying that the threads will accept a nut...works good enough to chase thread with. |
11-27-2019, 02:12 AM | #5 |
Not Yet Wild
Join Date: Oct 2019
Location: The Netherlands
Posts: 41
|
Re: Thread size Tie rod end
Thanks for the tip!
A Tie rod cost here in The Netherlands $90,- a tap only $11,-... |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tie Rod End Thread Size/Pitch | Gas EZGO | |||
new thread?pully size | Gas EZGO | |||
thread size? | Electric Yamaha | |||
Need Help with Bolt Size and Thread | Gas EZGO | |||
Clutch thread size ? | Gas EZGO |