|
03-22-2020, 10:25 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2020
Posts: 3
|
89 36 volt motor
I have taken motor apart to repair a burnt post , I am having a problem releasing the case from the armature , I currently have it soaking to see if that frees it from the case , Do I need to have it pressed out or can I hammer it out?
Last edited by jojogun52; 03-22-2020 at 11:31 AM.. Reason: What I am trying to accomplish |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-22-2020, 01:58 PM
|
#2 |
|
Not Yet Wild
Join Date: Mar 2020
Posts: 11
|
Re: 89 36 volt motor
I re did one I'm not sure if there all the same but there were 4 screws in the back that had to come out and then with alot finess I got it to.come apart,Didnt need a press or anything but mine was pretty stuck
|
|
|
|
|
03-22-2020, 04:08 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2020
Posts: 3
|
Re: 89 36 volt motor
Ok thanks I know I unscrewed 4 screws from the inside .I have it soaking in some wd 40 and have the brushes being sent by mail. So I will apply some heat and see if it lets go in a few days .
|
|
|
|
|
03-23-2020, 06:50 PM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2020
Posts: 3
|
Re: 89 36 volt motor
I never did get it apart,but i managed to squeeze the new brushes in the motor and went with that thanks for responding
|
|
|
|
|
03-25-2020, 03:11 PM
|
#5 |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: 89 36 volt motor
 Also,  to BGW |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 36 volt motor into a 48 volt cart | Electric Club Car | |||
| 48 volt cart, 36 volt motor? | Electric Club Car | |||
| 48 volt motor into a 36 volt toaster cart | Electric Club Car | |||
| 36 volt motor in 48 volt cart | Electric Club Car | |||
| What model 36 volt motor do I need for my 48 volt cart? | Electric Club Car | |||
Linear Mode
