06-19-2011, 11:03 PM | #1 |
Not Yet Wild
Join Date: Mar 2008
Location: rochester,mn
Posts: 31
|
99 ezgo Z-bracket ?
99 gas txt eight inch lift and 23' tires and wheels, was told need a Z- braket to lower front of motor frame..
Any one have any pictures of a Z-bracket or and any sizes of drop or any info on this problem. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2011, 11:09 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 99 ezgo Z-bracket ?
Typically any gas cart with more than a 6 inch lift kit will wind up with the motor sloping too much. I do not know of any kit or Z bracket? But it may exist. The oil in the motor could all flow to the rear of the engine and the oil pick up tube is sort of at the front of the engine. There is only 1/5 qts in the engine so add a hill climb into the equation and you could be sucking air instead of oil. It may not be that drastic ... on my high lifted workhorse I lowered the front of the engine cradle a few inches. Pictures won't help because nothing was stock. That is basically what you are asking about, a way to lower the front of the engine. I think you will have to make something Custom.
|
06-19-2011, 11:35 PM | #3 |
Not Yet Wild
Join Date: Mar 2008
Location: rochester,mn
Posts: 31
|
Re: 99 ezgo Z-bracket ?
Ya i was wondering about that, making something custom, any ideas
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
88 ezgo starter bracket | Gas EZGO | |||
85' ezgo marathon tension bracket | Gas EZGO | |||
WTB 95 EZGO accelerator bracket | Golf Carts and Parts |