|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-30-2011, 09:58 AM | #11 |
Not Yet Wild
Join Date: Oct 2011
Location: South Carolina
Posts: 14
|
Re: 2011 txt (kawasaki) assist and suggest
removed the plate the only thing underneath is a solid steel rod. in the rear over the differential is a throttle cable which I adjusted the slack out of and is set to just before the rev limiter. Above that is another cable which is connected to the front switch for forward neutral and reverse. Near the carb is a cable but that is for the choke. There is also a screw which I believe is for the idle. Suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-30-2011, 10:26 AM | #12 |
Gone Wild
Join Date: Feb 2011
Posts: 341
|
Re: 2011 txt (kawasaki) assist and suggest
Can you take a picture of the parts? I'm sorry but I'm not to familiar with the Kawasaki engine, all the carts around here are electrics, and the few gassers are robins.
|
10-30-2011, 10:41 AM | #13 |
Not Yet Wild
Join Date: Oct 2011
Location: South Carolina
Posts: 14
|
Re: 2011 txt (kawasaki) assist and suggest
Sure no problem give me a bit and I will post them.
|
02-22-2012, 05:57 PM | #14 |
Not Yet Wild
Join Date: Oct 2011
Location: South Carolina
Posts: 14
|
Re: 2011 txt (kawasaki) assist and suggest
I saw a previous posting for a smaller belt and 28 degree clutch. Does my cart have the 28 degree clutch and what belt do I need to get to help. I have it with a cart mechanic who mentioned it but they typically work on electric.
|
02-22-2012, 07:03 PM | #15 |
Getting Wild
Join Date: Feb 2012
Location: NW Oregon
Posts: 133
|
Re: 2011 txt (kawasaki) assist and suggest
I have a 91' marathon 2 stroke and I took a dremel to the inside of the intake tube ground all the rough spots down and then I sanded it smooth and polished it.
It seamed to make a small difference nothing too big but somthing is better than nothing. I'm not sure if it will work on your setup but it's worth a shot. |
02-22-2012, 08:35 PM | #16 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: 2011 txt (kawasaki) assist and suggest
the 28 clutch is not for speed it is for torque.
the 36 is for speed not for torque. can you tell a dif b/t the 2, prob not. your cart should already have the HD shorter belt. |
02-22-2012, 10:43 PM | #17 |
Not Yet Wild
Join Date: Oct 2011
Location: South Carolina
Posts: 14
|
Re: 2011 txt (kawasaki) assist and suggest
It appears to have some slack. Maybe I need to save up for a vanguard.
|
02-23-2012, 10:58 PM | #18 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: 2011 txt (kawasaki) assist and suggest
there will be some slack on the belt so the eng will start.
but these belts wear on their sides. they get narrower. you may want to measure your belt and see ifs it too narrow. i am not sure new belt width, but i know its on here somewhere. |
03-29-2012, 10:39 AM | #19 |
Not Yet Wild
Join Date: Mar 2012
Location: Pennsyvainia
Posts: 39
|
Re: 2011 txt (kawasaki) assist and suggest
Leave a little govenor control in it the kawasaki engines do not have a rev limiter in them just a word of cation. 25 mph on 22" tires is close
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2011 Question | Electric EZGO | |||
Suggest - stainless exhaust ezgo st4x4 18hp honda | Big Block Talk! |