|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-22-2011, 10:57 AM | #1 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Replacing tire rod ends and rack bellows
Replacing my tie rod ends (3) and the bellows on my steering rack this weekend. I was wondering if anyone here had done this and any pitfalls? Thanks in advance!!!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2011, 11:02 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Replacing tire rod ends and rack bellows
Measure how far into the rack the tie rod end is threaded on the old unit and duplicate this depth of installation for the least change in current steering geometry & alignment.
|
11-22-2011, 11:25 AM | #3 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Replacing tire rod ends and rack bellows
OK. Thanks. I have done this many times on cars. Just wondering if there is any difference.
|
11-22-2011, 12:00 PM | #4 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: Replacing tire rod ends and rack bellows
If you can do real cars then golf cars will come easy..
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Bellows Steering Boot Replacement | Electric EZGO | |||
tie-rod ends | Gas Club Car | |||
tie rod ends | Electric EZGO | |||
rod ends | Lifted Golf Carts | |||
Do the tie rod ends need replacing? | Gas Yamaha |