|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-16-2014, 12:27 PM | #1 |
Not Yet Wild
Join Date: Sep 2011
Posts: 64
|
need help with new F/R SWITCH
I got a new HD switch today... now when I put it in forward the power light is on... soo as I move it to reverse the light goes out and now power... someone said to adjust the contacts.... not sure how to do that
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2014, 02:30 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,998
|
Re: need help with new F/R SWITCH
if you look at the base....your new switch has "slotted" holes, which allows you to fine tune its location, where as the stock one has normal holes. what you will need to do is to loosen up the base bolts a tad to allow you to move the entire switch the direction you need it to move so that the contacts make connection. I had to do this very thing when I installed mine.
|
03-16-2014, 05:35 PM | #3 |
Gone Wild
Join Date: Aug 2011
Location: Central Delaware
Posts: 859
|
Re: need help with new F/R SWITCH
Make sure you have lots of light in the area and can see the contacts clearly. You want good, solid, square on contact. Each contact pad should mirror the one it is touching.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Pick the winner: ITS, Read Switch, or Key Switch | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |