|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-27-2014, 04:00 PM | #1 |
Getting Wild
Join Date: Mar 2013
Location: Peachtree City GA
Posts: 117
|
GE high speed motor issues
I need a part for my GE high speed motor. I'm not sure what it is called but I have attached some pictures of it. but basically it is the plastic piece that keeps the A1 brush post from touching the case. Also I have realized that it should be two peices, the inside piece that hold the brush from moving and the outside piece. The motors model number is 5BC48JB1161
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-27-2014, 05:43 PM | #2 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: GE high speed motor issues
bout half way down the page under insulators http://www.lunaindustriesinc.com/brushholders.htm
|
08-27-2014, 06:42 PM | #3 |
Getting Wild
Join Date: Mar 2013
Location: Peachtree City GA
Posts: 117
|
Re: GE high speed motor issues
Thank you VERY Much!!!
|
08-29-2014, 04:38 PM | #4 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: GE high speed motor issues
your welcome. at first i didn't think i would find it, but i stumbled across the right place
|
|
|
Similar Threads | ||||
Thread | Forum | |||
D&D PDS High Speed Motor and 8:1 High Speed Gear Experiment... | Electric EZGO | |||
Motor won't hit high speed | Extreme DC! | |||
D&D high speed motor | Golf Carts and Parts | |||
High speed motor | Electric Club Car | |||
high speed motor | Electric EZGO |