|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-18-2014, 06:21 AM | #11 |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2015, 01:56 PM | #12 |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
Re: 2008 precedent dress up
What a start to the year.
Bent an upper control arm on right side when the 12" wheel jambed against the inner fender Wire channel (that's with the MadJax Low Pro Lift, but I think my tires were too wide for the set up) Decided to use a Rhox 3" Spindle lift - No problem except now it looked goofy with 12" rims and was now too tall to fit in car port - GEEZ!! So got new 14' Chromies to fill up the wheel well and replace roof with roll bar and roadster windshield (ala "scooterman" profile pic!! thank you for the idea) and now it fits in the car port again!! But oh man is it hot in the sun! Just ordered a SunTopper Convertible Top - and that should do it. |
07-27-2015, 03:41 PM | #13 |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
Re: 2008 precedent dress up
|
07-27-2015, 03:43 PM | #14 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: 2008 precedent dress up
Where did you get the roll bar?
|
07-27-2015, 03:46 PM | #15 |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
Re: 2008 precedent dress up
So now the problem is alignment - have been struggling getting it correct and once it gets close the alignment seems to change when turning.
That said I just now read numerous threads on how to adjust camber as well as toe in so I will start again because camber is way off on right front and I think that may be affecting the way the toe in is flipping from in to out and back after adjusting over and over. Will start again this weekend and report back |
07-28-2015, 02:12 PM | #16 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: 2008 precedent dress up
|
07-28-2015, 03:16 PM | #17 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: 2008 precedent dress up
google " roll bar for club car precedent". You'll see it in the first few hits.
I can't post link cause they're not a site sponsor. If it was me, I would call David at revolution golf cars and see if he could get it. |
09-03-2015, 07:21 PM | #18 |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
Re: 2008 precedent dress up
Sorry for the long reply time - Eagle Custom Carts - Found them online
http://www.eaglecustomcarts.com/stor...category_ID=26 Capture.JPG |
09-04-2015, 05:53 AM | #19 | |
Not Yet Wild
Join Date: Jul 2014
Location: Welland Ontario
Posts: 56
|
Quote:
Spoke with rep from RHOX. turns out my alignment issue is a known material fact. The cure is found in something called a Precedent Kingpin Camber Adjustment Kit part number LIFT-191 Parts are on order but as luck would have it (mine anyway) are on back order. Have also added a soft top to keep the Rays off of my bald melon. This allows me to fold it down to park cart in the car port or shed or bike trailer... Plus it looks pretty unique too Sent from my iPad using Tapatalk |
|
09-04-2015, 06:55 AM | #20 |
Gone Wild
Join Date: Aug 2015
Location: Zephyrhills fl
Posts: 252
|
Re: 2008 precedent dress up
That is a GREAT Looking cart. Love the S.O.A. it's too cool Thanks for the pictures
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2008 Club Car Precedent vs. 2008 ezgo pds | Electric Club Car | |||
2008 Club Car precedent vs. 2008 ezgo pds | Electric EZGO | |||
2008 CC Precedent | Electric Club Car | |||
2008 cc precedent won't go | Electric Club Car | |||
EZGO dress up parts | Gas EZGO |