|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-12-2014, 11:09 AM | #1 |
My wife says I'm crazy...
Join Date: Sep 2014
Location: Central Ohio
Posts: 384
|
Help a arm lift issue g16
Trying to install a jakes a arm lift on a 96 g16 and the a-arm bolt on the back side seems to be binding and won't come out. Not sure how to get it out without causing damage. Has anyone else dealt with this?ImageUploadedByTapatalk1410538100.067830.jpg. I've doused it multiple times with pb blaster and won't budge. Nut came off fine.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-12-2014, 11:48 AM | #2 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Help a arm lift issue g16
If you have an air-hammer,rattle against the flats where the wrench goes,until u see rusty dust coming out,it will be loose then.I work in a spring shop,this is a daily thing.Hope this helps.
|
09-12-2014, 08:46 PM | #3 |
My wife says I'm crazy...
Join Date: Sep 2014
Location: Central Ohio
Posts: 384
|
Re: Help a arm lift issue g16
Took me a while and lot of cussing but got it. Thanks
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Air Box Issue After Lift? | Gas EZGO | |||
Lift issue | Electric Club Car | |||
Lift issue? | Electric Club Car | |||
Jakes Lift Kit Tie Rod issue | Electric EZGO | |||
G-22 Gas Lift Issue | Gas Yamaha |