lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-15-2018, 08:55 AM   #1
49ford
Gone Wild
E-Z-GO
 
Join Date: Nov 2011
Location: SW MO
Posts: 218
Default melex 252

I have a Melex 252 I bought thinking it was like the ezgo. Not so much. I found a big cable diagram for it. And emailed Poland factory to see if I could get a regular wiring diagram or a schematic. No luck so far.

I have the reverse buzzer working but not moving forward or backward. On checking the on off switch, its 37v on both sides, and all the wires are blue for some reason. I suspect its been rewired as it had old masking tape for labeling on the wires. I'm tempted to try running wires like ezgo, but components not quite the same.

Has anyone got a diagram or experience with these carts?
49ford is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
Melex Melex
Melex 412 Melex
Melex no go Melex
101 melex Restoration
melex Golf Carts and Parts


All times are GMT -5. The time now is 11:05 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.