|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-01-2019, 08:20 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Posts: 31
|
Yamaha G9E controller wiring diagram
I have a Yamaha g9 electric cart that is been upgraded to a 400 amp controller. I bought the cart non-running. my number one issue is I can't find a wiring diagram anywhere for this type of setup it has the marathon style controller with the three tabs for the throttle sensor and other. The solenoid clicks but the cart does not move tried a good used motor with no help I'm not sure if the throttle sensor is wired correctly. Battery b- to m- stays at pac reference voltage as pedal is depressed to the floor. Any assistance would be greatly appreciated. Pack voltage is 37.9. the three wires are green white and yellow
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV danaher controller wiring diagram | Electric EZGO | |||
Yamaha G19E Wiring Diagram | Electric Yamaha | |||
2009 Ruff N Tuff Controller wiring diagram | Electric golf carts | |||
82 Yamaha G1-E3 wiring diagram | Electric Yamaha | |||
Curtis 1206 controller wiring diagram | Electric EZGO |