86 g1 odd ball issue

TheIceCable · 06-21-2018, 09:15 PM

So I just got this thing done(exterior) and I've been driving it quite awhile for some long distances. Well tonight I went to put.it away after a long trip and I'll stop and the engine keeps running. I switch it to off and it stops. Switch to reverse and it kicks on. All without ever hitting has pedal. Any help would be awesome.

Sent from my Nexus 7 using Tapatalk

bhunterp · 06-21-2018, 10:00 PM

Sounds like the pedal switch is stuck. If mine gets stuck I just stomp the pedal and it will free up. If not you can remove the access panel and push it a couple times, should free up. If its battery it has a potentiometer. It has a plastic piece that will loosen up and hold it open.

Sent from my SAMSUNG-SM-G930A using Tapatalk

mikeasis · 06-22-2018, 03:14 PM

what sucks here is I don't belive the factory switch is available and the after market switches are know to be of poor quality.

bhunterp · 06-22-2018, 03:25 PM

It's just a normally open switch that closes when the pedal hits it. You can wire it to a toggle switch and put it anywhere. Turn it on and give it gas

Sent from my SAMSUNG-SM-G930A using Tapatalk

TheIceCable · 06-24-2018, 01:07 PM

It was def the switch. I lifted it up and saw the plastic nut so I detached pedal assembly. And reattached the switch. All is well now

Sent from my Nexus 7 using Tapatalk

06-21-2018, 09:15 PM	#1
TheIceCable Not Yet Wild Join Date: Jul 2017 Location: Southern Indiana Posts: 72	86 g1 odd ball issue So I just got this thing done(exterior) and I've been driving it quite awhile for some long distances. Well tonight I went to put.it away after a long trip and I'll stop and the engine keeps running. I switch it to off and it stops. Switch to reverse and it kicks on. All without ever hitting has pedal. Any help would be awesome. Sent from my Nexus 7 using Tapatalk

06-21-2018, 10:00 PM	#2
bhunterp Not Yet Wild Join Date: Mar 2018 Posts: 62	Re: 86 g1 odd ball issue Sounds like the pedal switch is stuck. If mine gets stuck I just stomp the pedal and it will free up. If not you can remove the access panel and push it a couple times, should free up. If its battery it has a potentiometer. It has a plastic piece that will loosen up and hold it open. Sent from my SAMSUNG-SM-G930A using Tapatalk
bhunterp Not Yet Wild Join Date: Mar 2018 Posts: 62

06-22-2018, 03:14 PM	#3
mikeasis Gone Wild Join Date: Jan 2017 Location: venice Posts: 1,807	Re: 86 g1 odd ball issue what sucks here is I don't belive the factory switch is available and the after market switches are know to be of poor quality.

06-22-2018, 03:25 PM	#4
bhunterp Not Yet Wild Join Date: Mar 2018 Posts: 62	Re: 86 g1 odd ball issue It's just a normally open switch that closes when the pedal hits it. You can wire it to a toggle switch and put it anywhere. Turn it on and give it gas Sent from my SAMSUNG-SM-G930A using Tapatalk
bhunterp Not Yet Wild Join Date: Mar 2018 Posts: 62

06-24-2018, 01:07 PM	#5
TheIceCable Not Yet Wild Join Date: Jul 2017 Location: Southern Indiana Posts: 72	Re: 86 g1 odd ball issue It was def the switch. I lifted it up and saw the plastic nut so I detached pedal assembly. And reattached the switch. All is well now Sent from my Nexus 7 using Tapatalk

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Ball Deflector? who has one?	Electric EZGO
91' Par Car ball cups/ Ball joint ends???	Columbia ParCar
Tie Rod ball joint help	Lifted Golf Carts
Tie rod end ball joints	Gas EZGO
did anyone see my ball	Members Rides