08-01-2010, 08:31 AM | #11 |
Not Yet Wild
Join Date: Mar 2008
Location: Tennessee
Posts: 20
|
Re: Clutch for 16hp. duromax
Just completed a repower on my 84 CC with a Honda GX390.Bought new clutch and tapered adapter from Cartspartsplus,cut the shaft per instructions,installed clutch,fabbed up a motor mount,starter/gen bracket,throttle linkage and exhaust pipe to stock muffler and very pleased with the results.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-01-2010, 08:59 AM | #12 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Clutch for 16hp. duromax
Got any pics brad? Id like to see that starter gen bracket. Also did you buy the duromax without a starter?
|
08-01-2010, 10:05 AM | #13 |
Not Yet Wild
Join Date: Mar 2008
Location: Tennessee
Posts: 20
|
Re: Clutch for 16hp. duromax
I'll have to get my daughter to show me how to do pics (im in the over 50 crowd) My motor is a Honda without a elec.starter,which let me use the original belts.On the S/G bracket I cut the original down and welded a flat 1 1/4 x 9ish x 1/8 plate on the bottom and drilled the holes to match the 2 rear fuel tank mounting holes then fabbed a tensioner that pushes the s/g backwards for belt tension (like a jackscrew) To me the cool thing was that the wires all hooked up as the factory even the low oil sensor.
|
10-04-2010, 12:45 PM | #14 |
Not Yet Wild
Join Date: Sep 2009
Location: Lake worth,Fl
Posts: 11
|
Re: Clutch for 16hp. duromax
I bought a CPP06 clutch from CPP. Is there a way to adjust the idle speed on the clutch. I have idled the motor (16hp powermax) as low as it will idle but cart still want's to roll at idle and will not shift.
|
10-04-2010, 03:00 PM | #15 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Clutch for 16hp. duromax
|
10-05-2010, 08:51 AM | #16 |
Not Yet Wild
Join Date: Sep 2009
Location: Lake worth,Fl
Posts: 11
|
Re: Clutch for 16hp. duromax
I don"t know , That is what I was considering. What is trhe proper tension ,drag ,slack for this. I am going to the garage now and loosen the belt some . Thanks Dave
|
|
|
Similar Threads | ||||
Thread | Forum | |||
88 stock clutch going on a 16hp clone | Big Block Talk! | |||
B&S 16hp rebuild | Big Block Talk! | |||
16hp clone / driven Clutch | Gas Yamaha | |||
16hp vanguard with stock ezgo clutch help | Big Block Talk! | |||
clutch for POWERMAX 16hp? | Big Block Talk! |