magneto picture

schwartzcart · 09-25-2011, 03:55 PM

I just started working on my yamaha g1 1984. I pulled the flywheel to clean it out. I disconected the magnetos and I don,t remember how to install them. Is there any pictures out there?

sho305 · 09-25-2011, 05:54 PM

There is a diagram at TNT carts in the yamaha parts section, not sure if that helps.

There is also a wiring diagram in the stickies above should tell the wire colors.

schwartzcart · 09-25-2011, 06:47 PM

Thanks, I will look at that site. I was able to figure it out once I looked at it a second time. Thank you for tour help!

sho305 · 09-26-2011, 10:18 AM

I should have said if you want to mod the cart at all you can advance the timing, you move the plate opposite the flywheel direction in forward to advance timing. This can get you more speed in forward it will dog reverse a little. You file out the holes in the plate and rotate it a little iirc you can't move it that far anyway but it helps a little. Get the head cut to raise compression, you will notice a difference. Most shops will cut it pretty cheap unless you have a friend with a mill.

schwartzcart · 09-30-2011, 09:48 PM

I will try this to see what happens. I will let you know how it comes out.
By the way my cart runs much better now!

09-25-2011, 03:55 PM	#1
schwartzcart Not Yet Wild Join Date: Sep 2011 Location: michigan Posts: 3	magneto picture I just started working on my yamaha g1 1984. I pulled the flywheel to clean it out. I disconected the magnetos and I don,t remember how to install them. Is there any pictures out there?

09-25-2011, 05:54 PM	#2
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: magneto picture There is a diagram at TNT carts in the yamaha parts section, not sure if that helps. There is also a wiring diagram in the stickies above should tell the wire colors.

09-25-2011, 06:47 PM	#3
schwartzcart Not Yet Wild Join Date: Sep 2011 Location: michigan Posts: 3	Re: magneto picture Thanks, I will look at that site. I was able to figure it out once I looked at it a second time. Thank you for tour help!

09-26-2011, 10:18 AM	#4
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: magneto picture I should have said if you want to mod the cart at all you can advance the timing, you move the plate opposite the flywheel direction in forward to advance timing. This can get you more speed in forward it will dog reverse a little. You file out the holes in the plate and rotate it a little iirc you can't move it that far anyway but it helps a little. Get the head cut to raise compression, you will notice a difference. Most shops will cut it pretty cheap unless you have a friend with a mill.

09-30-2011, 09:48 PM	#5
schwartzcart Not Yet Wild Join Date: Sep 2011 Location: michigan Posts: 3	Re: magneto picture I will try this to see what happens. I will let you know how it comes out. By the way my cart runs much better now!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
WTB: YAMAHA G1 Magneto	Golf Carts and Parts
60's cushman truckster wico magneto info	Gas golf carts
Need a picture!	Electric Club Car
Cleaning Magneto?	Gas Yamaha
Does anyone know how far to space a magneto?	Gas Club Car