|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-24-2013, 06:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2013
Location: TN
Posts: 26
|
G1 Primary Sheave Removal - HELP!
Purchased a non-running '84 G1 and have had nothing but problems with it so far. This one has me stuck. I was trying to replace my crank seal and my clutch puller stripped and is now stuck in the sheave shaft. It just spins freely. Maybe worse is that the sheave didn't break loose and is still on the engine. I'm pretty much dead in the water now. Any ideas how to get the sheave out at this point? Thanks in advance for any ideas.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-24-2013, 11:30 PM
|
#2 | |
|
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: G1 Primary Sheave Removal - HELP!
Quote:
with rags so it wont turn , then try to ease it out, if u can try to pull and turn at the same time, maybe visegrips will do, good luck. |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G2 carb (AM) and primary sheave weights used | Golf Carts and Parts | |||
| Primary sheave | Gas Yamaha | |||
| g2 primary sheave | Gas Yamaha | |||
| WTB G9 Primary Fixed Sheave | Golf Carts and Parts | |||
| wtb yamaha g9 primary sliding sheave | Golf Carts and Parts | |||
Linear Mode
