|
10-18-2013, 01:19 PM
|
#11 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Augusta
Posts: 57
|
Re: Help with new project!!!!!
Ill buy the tach then..... i plan to swap the motor out eventually....Might buy a brand new 350 from a friend...Not sure what the 290 is worth.... Dont see dumping 500-1000 on a 350...Ill check on the rev limiter.... How do you adjust the govenor?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-20-2013, 06:09 AM
|
#12 |
|
Gone Broke
Join Date: Oct 2011
Location: Galveston, Texas
Posts: 1,592
|
Re: Help with new project!!!!!
did you unplug the rev limiter???
what kind of speed or you getting now?? that should have helped......greatly you should be doin 18 to 20 mph now.... |
|
|
|
|
10-29-2013, 11:33 PM
|
#13 |
|
Not Yet Wild
Join Date: Jun 2010
Location: st.louis,mo
Posts: 60
|
Re: Help with new project!!!!!
you're right I wouldn't spend that kind of money on a 350 motor when you can buy a 440 clone motor for the same money double your horse power.
if you look in the big block section deal finders a guy a in Vegas that sells clone motors you can set you up |
|
|
|
|
10-30-2013, 09:42 AM
|
#14 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Augusta
Posts: 57
|
Re: Help with new project!!!!!
Bought a speedo and im only gettin 16mph out of the 290....I would still buythe 350 if i can find someone to buy the 290 from me..... i dont know much about the clone motors or how to fab one in....sounds expensive... More homework to do i guess. The cart is just too slow.
|
|
|
|
|
10-30-2013, 11:59 AM
|
#15 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,932
|
Re: Help with new project!!!!!
16 mph with 22's and a zip tied governor spring doesn't sound right,
that sounds more like a stock governor setting with 22's... I'd double check to see if the zip tie might have broke.  |
|
|
|
|
10-30-2013, 12:09 PM
|
#16 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Augusta
Posts: 57
|
Re: Help with new project!!!!!
I can check again but last time i looked everyting was intact. Not sure what to do.
|
|
|
|
|
10-30-2013, 12:18 PM
|
#17 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,932
|
Re: Help with new project!!!!!
It should look something like this...
  |
|
|
|
|
10-30-2013, 12:32 PM
|
#18 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Augusta
Posts: 57
|
Re: Help with new project!!!!!
The Tie wrap keeps it from expanding all the way?? Hard to tell what is actually happening....Great picture though
|
|
|
|
|
10-30-2013, 12:57 PM
|
#19 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,932
|
Re: Help with new project!!!!!
Correct!
 BUT... if you tighten the zip down all of the way, you may be asking for trouble! (your engine will go... BOOM!) |
|
|
|
|
10-31-2013, 01:27 PM
|
#20 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Augusta
Posts: 57
|
Re: Help with new project!!!!!
thanks for the help....Ill get this motor figured out one day!
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Next project | Electric Club Car | |||
| My new project......... | Members Rides | |||
| New project. | On Road Golf Carts! | |||
| my project g2 | Members Rides | |||
| 97 CC project | Electric Club Car | |||
Linear Mode
