|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-01-2015, 06:27 PM | #11 |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
Ok the small black wire was the culprit. It had pulled loose from the connector. Popped her right back in and now we're charging.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2015, 06:37 PM | #12 |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
Ok. Here is my current setup, I'm on a 08 Precedent, a plum quick bandit motor. 6" lift, with 14" wheels with Predator tires on it. Before the controller swap i was able to cruise at 24 with no issues. The torque going up hills was suffering a little due to the oversized tires. After the Torque 600 controller upgrade all I can say is WOW!
The difference in acceleration, top speed and having regen again now is awesome. I'm not sure what the Steen boys due to the PQ motors but with the stock controller I had lost my regen. After the Torque 600 I have full regen with the adjustability of dialing it all the way down or up. As far as top speed goes I hit 35 mph on a straight in both directions. I have found the cart gets a little wacky at that speed so I dialed it down to a top speed of 30 which was at about 2 o'clock on the adjuster. The torque improvement is unreal. Going up even a slight grade or passover would slow the cart down considerably. I was able to maintain 24 mph UP THE HILL. Thats is just insane. This being the first controller I've ever played with I like the ease of the knobs to literally turn up or down the different features. It's almost idiot proof and I love the lockout so I don't have to worry when the kids take the cart out. I'm also in beginning process of stretching my cart. I knew I would need more oomph with the added weight of the stretch kit coming. The MadJax Torque 600 is a a great mod and in my opinion worth the money. I will be installing a Scotty B Super Solenoid here the next few days. I'm excited to see the potential with the extra amperage from the solenoid as well. |
06-01-2015, 07:27 PM | #13 | |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: MadJax Torque 600 Controller Install
Quote:
|
|
06-01-2015, 07:33 PM | #14 |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
Haha. Yes it was going over Viera Blvd to the west side of 95.
|
06-01-2015, 08:29 PM | #15 |
Getting Wild
Join Date: Jun 2014
Location: Michigan
Posts: 80
|
Re: MadJax Torque 600 Controller Install
AWESOME!! Can you turn Regen all the way off to coast down hills?
Im ordering the kit tonight. It was based on your review! Thanks Quizzy!! |
06-01-2015, 09:06 PM | #16 |
Gone Wild
Join Date: Jun 2014
Location: Green Valley, Az
Posts: 678
|
Re: MadJax Torque 600 Controller Install
What are you stretching it into? Where do you buy a stretch kit?
|
06-02-2015, 07:44 AM | #17 |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
|
06-02-2015, 07:45 AM | #18 | |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
Quote:
-- edit TNG -- Please read the rules for non sponsor selling. Last edited by TheNewGuy; 06-02-2015 at 09:17 AM.. Reason: non sponsor selling |
|
06-02-2015, 11:20 AM | #19 |
Gone Wild
Join Date: Nov 2013
Location: North Augusta SC
Posts: 273
|
Re: MadJax Torque 600 Controller Install
If you don't mind me asking what did the controller and OTF cost?
|
06-02-2015, 11:25 AM | #20 |
Not Yet Wild
Join Date: Jun 2013
Location: Rockledge, FL
Posts: 60
|
Re: MadJax Torque 600 Controller Install
Retail on everything for the Controller, harness, and programmer is about 1100
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
MadJax Controllers (Torque) | Electric Club Car | |||
Torque kit install problems | Electric Club Car | |||
Install Clutch Torque Spring | Gas Club Car | |||
G2 stuck in low after torque spring install | Gas Yamaha | |||
Problems After Torque Spring Install | Gas Yamaha |