|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-23-2016, 06:23 PM | #1 |
Gone Wild
Join Date: Oct 2012
Location: Canyon Lake, TX
Posts: 628
|
RXV throttle Pedal Test
I conducted the first test of the throttle pedal and I had no reading. So now what?
My programmer indicates I have a throttle wiper and brake wiper error. By the schematic, the voltage seems to come from the controller...again...what's my next step? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-23-2016, 09:57 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV throttle Pedal Test
Red wire at throttle & brake sensors must have 5v before any further tests. If not, try plug each sensor to see which one kills the voltage.
|
01-24-2016, 08:17 AM | #3 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV throttle Pedal Test
What year is RXV?
Does handheld show voltage change when pedals pushed? Does handheld also show motor temp warning? |
01-24-2016, 10:15 AM | #4 |
Gone Wild
Join Date: Oct 2012
Location: Canyon Lake, TX
Posts: 628
|
Re: RXV throttle Pedal Test
|
01-24-2016, 04:29 PM | #5 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV throttle Pedal Test
motor temp is under warnings not errors.
i suspect you will have motor temp warning also. please double check and post. |
01-24-2016, 07:46 PM | #6 |
Gone Wild
Join Date: Oct 2012
Location: Canyon Lake, TX
Posts: 628
|
Re: RXV throttle Pedal Test
Under present errors:
Throttle wiper Brake wiper Under fault history I have the following listed as presented: Throttle wiper Brake wiper Hpd sequencing fault Controller overcurrent Throttle zero check Obviously something got screwed. Just looking to make this work. I hooked up the controller with ezgo's darn connectors. The ezgo guy said that he doesn't like them and recommends soldering the connection. I was like a kid with a new toy and didn't feel like jacking with soldering and wanted to go play. Well the result seemed to be a poor connection as indicated in a previous troubleshooting post. So I then soldiered the connections. It seems that there was an event when I was working. Your guidance is appreciated. |
01-26-2016, 12:10 PM | #7 |
Not Yet Wild
Join Date: Nov 2011
Posts: 1
|
Re: RXV throttle Pedal Test
ok I have a 2008 rxv replace the stock controller with a Curtis controller kit and the golf cart wont start no ground to solenoid what to check
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Throttle pedal binding | Gas Club Car | |||
Throttle pedal adjustment | Gas Yamaha | |||
throttle pedal stcking | Electric Club Car | |||
Throttle pedal travel | Electric Club Car | |||
Throttle pedal? | Electric Club Car |