|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-09-2009, 08:49 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Location: PA
Posts: 7
|
Question for anyone running a Honda engine
Hi. I am building a 1988 club car with a 20 hp honda engine. I am using the stock driven clutch with power kit, and stock drive clutch with the 200 rpm spring. In order to mount the engine i would like to know what the center to center measurment is from crank shaft to trans shaft and what belt your using. I know from reading lots of posts that someone will ask, so to clear things up this engine came from a welder. It had a long taper on the crank shaft so i pulled it and had a friend with a machine shop make a copy of the taper thats on a F290. Thanks in advance for your help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2009, 11:31 PM | #2 |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: Question for anyone running a Honda engine
Check with CPP, site sponsor. He can probly tell ya.
|
03-15-2009, 09:09 PM | #3 |
Not Yet Wild
Join Date: Mar 2009
Location: PA
Posts: 7
|
Re: Question for anyone running a Honda engine
Thanks, i will give him a call.
|
03-15-2009, 09:18 PM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,217
|
Re: Question for anyone running a Honda engine
Use the same c to c as a stock engine.
|
03-15-2009, 09:36 PM | #5 |
Not Yet Wild
Join Date: Mar 2009
Location: PA
Posts: 7
|
Re: Question for anyone running a Honda engine
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
01' CC w/ 290 engine running intermittently | Gas Club Car | |||
14hp Honda Engine | Design Center | |||
Engine tries to keep running | Gas Club Car | |||
honda 440 engine for sale | Golf Carts and Parts | |||
Honda Engine Replacement | Gas EZGO |