|
05-16-2010, 08:46 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2010
Posts: 20
|
clutch springs
do you need any special tool to change both springs in the clutches. i have a 93 ezgo marthon.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-17-2010, 10:59 AM
|
#2 |
|
Gone Wild
Join Date: Apr 2010
Location: Born and raised in the state of Confusion
Posts: 150
|
Re: clutch springs
I can speak for a 93 2-Cycle. The front (drive) clutch needs a puller and you will probably have to remove the engine from the cart to pull it. The rear (driven) clutch can be removed by hand after removing the one bolt holding it on. Depending on where you buy your new spring, it may come with an install tool to make putting the clutch back together easier but you don't have to have the tool. All parts can be purchased from the great site sponsors here. While you have it out, you should replace the 3 feet/wear pads too, that will only cost a few dollars.
Experts-please correct me if I am wrong. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| clutch springs | Lifted Golf Carts | |||
| clutch springs!!! | Gas Club Car | |||
| Will new springs help ??? | Gas Club Car | |||
| Stronger Springs | Gas Club Car | |||
| HD rear springs | Gas EZGO | |||
Linear Mode
