|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-02-2010, 05:19 PM | #1 |
Not Yet Wild
Join Date: Jan 2010
Posts: 7
|
88 Marthon Body Options
Can you cahnge to a newer body. I just got my 88 Marathon and hate the way it looks in the front i want it to be more rounded. What are my options?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-02-2010, 07:07 PM | #2 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: 88 Marthon Body Options
There are not too many options that I've seen with the Marathon ... Is yours the early '88 with the pointed nose or the later style with the plastic cowl (like the one in my Avatar)? I ask because there are cowls available with recessed headlights that look pretty slick, you may want to consider that option. Also, there are still fender flares and stuff like that floating around for these old dogs, and with a little creativity you can still make them look pretty slick ...
|
10-03-2010, 08:43 PM | #3 |
Not Yet Wild
Join Date: Jan 2010
Posts: 7
|
Re: 88 Marthon Body Options
It's the old style with no plastic piece. I want like a 94 and newer ezgo body is that possible ?
|
10-18-2010, 09:07 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: 88 Marthon Body Options
You can fit the TXT nose fairly easy.I removed mine and trimmed the dash-shelf to fit since i did not have the TXT dash-unit.I now have the proper dash,so the original shelf must be removed.There are nuts along the inside of the wheel-well,remove the cup-holder,and unbolt the dash-support plate.There are 2 hole on each side of the TXT nose,the lower one will line up with the flange on the foot-well.drill and bolt here.The TXT dash will secure the rest of the nose.My cart pic (avatar) is the cart i swapped bodies on.The rear is a little more involved and requires some fab-work/welding.Hope this helps
|
|
|
Similar Threads | ||||
Thread | Forum | |||
secondary options ? | Gas EZGO | |||
green body or camo dipped body | Electric Club Car | |||
1992 ez go marthon gas quits runing | Gas EZGO | |||
Cart Options | Extreme DC! | |||
options for lifting a 91 ez go marthon | Lifted Golf Carts |