|
04-02-2009, 04:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2009
Posts: 5
|
Big Jim
I have a new ignition switch made by Cole model 2670. but i did not receive a wiring diagram. The spaded connections are marked with a B, I, B1 and an L.
I will need to know where to connect the battery leads and the lights positive and negative connections. Thanks  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-03-2009, 10:00 AM
|
#2 |
|
Not Yet Wild
Join Date: Apr 2009
Posts: 5
|
Re: Big Jim
Can anyone help me with how to wire this ignition switch ?
|
|
|
|
|
04-03-2009, 10:13 AM
|
#3 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Big Jim
What model cart do you have?
|
|
|
|
|
04-03-2009, 10:16 AM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2009
Posts: 5
|
Re: Big Jim
Sorry that might help....duh !
a 93 EZGO Marathon, I am trying to replaced a bad ignition switch with the cole model 2670, this way the lights are on the same switch...the old toggle that was wired for the lights was also bad so by doing this I kill 2 birds with 1 stone. Any help is truely appriciated ! Jim |
|
|
|
|
04-03-2009, 10:45 AM
|
#5 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Big Jim
I don't think any of the diagrams I have will work on that. I'd just use an ohm meter and figure out how the switch turns on the connection and wire it up from that.
|
|
|
|
Linear Mode
