|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-14-2009, 10:21 PM | #1 |
Not Yet Wild
Join Date: May 2009
Posts: 9
|
help with engine mounting
Well I went nuts on my 94 medalist this weekend. I bought new leaf springs and belts but the project went a bit further. I removed the body, sanded & primed, painted it midnight blue base/clear. Came out pretty good. I cleaned the frame/floor boards and painted them with POR15 paint. Regreased front wheel bearnings, replaced rear brake shoes. For some reason I bought a timing belt so I figured I would replace it. Could not get the clutch off without lifting the engine which required removing the front mount. I tried without an impact and no luck which is why I elevated the engine. When I put it back together it seems the distance between the drive and driven clutches has decreased. Reason I say this is the belt is much easier to install/remove. I've looked at the rear engine mount points at the axle and the two bumps straddle the axle tube as they should. Can't figure this one out. Any ideas? My wife thinks I've gone crazy with this 15 yr old cart! I'm loving it. Thanks Anthony
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2009, 10:27 PM | #2 |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: help with engine mounting
Ruredy will be along shortly. He is the Master of the Ez Go.
|
06-15-2009, 04:37 AM | #3 | |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: help with engine mounting
Quote:
I'm going to have to agree with her, I don't think it's possible to shorten that distance given the way the mounts are. |
|
06-15-2009, 09:50 AM | #4 |
Not Yet Wild
Join Date: May 2009
Posts: 9
|
Re: help with engine mounting
Well thanks for the replies. I'll take some pictures if I can figure out how to upload them once it's all together. What a great site!
Anthony |
06-16-2009, 05:09 PM | #5 | |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: help with engine mounting
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB Engine Mounting Plate for 96 Club Car | Golf Carts and Parts | |||
stereo mounting | Gas EZGO | |||
mounting a cargo box | Design Center | |||
honda gx620 engine mounting plate | Big Block Talk! | |||
tire mounting | Lifted Golf Carts |